Specifying A Channel Name And Color Label - RSS M-400 Owner's Manual

Specifying a channel name
and color label
You can specify a channel name and color label for each input
channel. The channel name can be up to six characters, and you can
select one of eight colors as the color label.
Channel name entry and color label selection are done in the NAME
EDIT popup.
NAME EDIT popup
fig.ScrChNameEditGuide.eps
1
1.
TEMPLATE
Here you can select a name from a list.
• CATEGORY list
Select the category.
• NAME list
Select a name from within that category.
Choose the CATEGORY first, and then choose a NAME.
2.
Name edit field
You can edit the name in this field.
3.
Color label selection buttons
Use these buttons to select a color label for the channel.
2
3
Input channel operations
The function buttons have the following operations.
[F1 (Recall Template)] Enters the name selected in the TEM-
PLATE list into the name edit field.
[F2 (HISTORY)] Successively recalls the channel names
that have been entered since power-up,
starting with the most recent name.
[F3 (INSERT)] Inserts a space at the cursor location.
The characters to the right of the cursor
location will move to the right.
[F4 (A/a)] Changes the character at the cursor lo-
cation between uppercase and lower-
case.
[F5 (NUM)] Changes the character at the cursor lo-
cation to the numeral "0."
[F6 (DELETE)] Deletes the character at the cursor loca-
tion. The characters to the right of the
cursor location will move to the left.
[F8 (CLOSE)] Closes the popup.
Up to sixteen names will be remembered in HISTORY.
If HISTORY becomes full, the oldest name will be deleted.
Accessing the NAME EDIT popup
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChDisp.eps
2.
Press [F2 (NAME EDIT)] to access the NAME EDIT popup.
fig.ScrChNameEdit.eps
63