Matrix Send Operations - RSS M-380 Owner's Manual

MATRIX send operations

The MATRIX sends are used to send audio signals from AUX1–AUX16 or MAIN L/R to MATRIX1–MATRIX8.
ffig.OutBlkMtxSends.eps
MATRIX SENDS (AUX 1-16, MAIN L/R)
PRE EQ PRE FADER
FADER BAL
MUTE
4BAND
EQ
The MATRIX SENDS popup is used to perform AUX send
operations.
1.
In the fader module section, press a [SEL] button to select
the desired channel.
Select from AUX1–AUX16 or MAIN L/R.
2.
In the AUX SENDS area of the CHANNEL EDIT section,
press [DISP].
The MATRIX SENDS popup will appear.
fig.PopMtxSendFieldGuide.epsˆ
A B C D
A.MATRIX number and name
This indicates the MATRIX channel number and name.
B.Send level bar
This adjusts the send level to MATRIX in a range of -Inf dB–
+10.0 dB.
The color of the send level bar indicates the send point or the
status of the send switch, as follows.
Color of the Status
send level bar
Blue PRE EQ or PRE FADER send point
Green POST FADER send point
Gray Send switch is off
C.ON button
This turns the send switch on/off. The send switch turns the
signal to MATRIX on/off.
POST FADER OUTPUT LEVEL
GEQ
INSERT
LIMITER
MATRIX SEND 1-8
PRE EQ
MTX
SW SEND
LINK
PRE FADER
PAN
POST FADER
SW SEND
E
AUX send/MATRIX send
TO MTX 1, 3...7
TO MTX 2, 4...8
D.MATRIX LINK switch
This turns linking of adjacent odd-numbered/even-numbered
MATRIX channels on/off. If this is on, the adjacent MATRIX
channels will be linked.
If MATRIX is stereo-linked, the following parameters will be
shown for the odd-numbered MATRIX send.
fig.PopMtxSendField2Guide.eps
a
a.MATRIX pan slider
This adjusts the left/right panning of the signal send to the
stereo-linked MATRIX channels in a range of L63–R63.
E.Send point select buttons
These select the point from which the AUX or MAIN signal is
sent to MATRIX, from the following choices.
PRE EQ Send from the pre-EQ point.
PRE FD Send from the pre-fader point.
POST FD Send from the post-fader point.
In the MATRIX SENDS popup, the function buttons perform
the following operations.
Button
[F3 (ALL ON)
[F4 (ALL OFF)
[F5 (UNITY)
[F7( MTX SENDS)]
[F7( AUX SENDS)]
[F8 (CLOSE)]
Function
Turns on all send switches for each
send field.
Turns off all send switches for
each send field.
Sets the send level to 0.0 dB for the
send field at the cursor location.
Switch to the MATRIX SENDS
popup or the AUX SENDS popup.
This exists only for the MAIN L/R
channel.
Closes the popup.
89