Checking And Adjusting The Musician's Mix (Group Mix) - RSS M-380 Owner's Manual

Mixing console
Hide thumbs Also See for M-380:
Table of Contents

Advertisement

Management of the M-48 live personal mixer
Checking and adjusting the
musician's mix (Group Mix)
Accessing the M-48 GROUP MIX
popup
1.
Access the desired M-48 SETUP popup (p. 190).
fig.ScrM48Setup.eps
2.
Press [F5 (GROUP MIX)].
The M-48 GROUP MIX popup will appear.
fig.ScrM48GrpMix1_Guide.eps
A
B
C
• When the EQ setting display is shown
fig.ScrM48GrpMix2_Guide.eps
A
B
C
A.Target M-48 indication
This indicates the unit name of the M-48 that is the target of
the M-48 GROUP MIX popup.
B.Group number
This indicates the group number.
198
C.NAME
This indicates the group name.
You can move the cursor here and press [ENTER] to access the
NAME EDIT popup.
D.SOLO button
This turns solo on/off for each group.
E.EQ graph
This indicates the approximate response of the group's EQ.
You can move the cursor here and press [ENTER] to turn the
EQ indication on/off.
F.REVERB SEND knob
This adjusts the group's reverb send in a range of -Inf dB –
+10.0 dB.
G.PAN knob
This adjusts the group's pan in a range of L63–C–R63.
This pan setting is a relative adjustment to the pan specified by
the source level/pan settings. In some cases, the M-48's source
pan may reach the maximum or minimum value before this
value reaches the maximum or minimum value.
H.VOLUME knob
This adjusts the group's volume in a range of -Inf dB – +20.0
D
dB.
E
F
This volume setting is a relative adjustment to the level
G
specified by the source level/pan settings. In some cases, the M-
H
48's source level may reach the maximum or minimum value
before this value reaches the maximum or minimum value.
The following knobs are shown if the EQ setting indication is
displayed.
I.HI GAIN knob
This adjusts the HI gain in a range of -15.0 dB – +15.0 dB.
E
J.MID GAIN knob
I
This adjusts the MID gain in a range of -15.0 dB – +15.0 dB.
J
K.MID FREQ knob
K
This adjusts the MID center frequency in a range of 20 Hz–20.0
L
kHz.
L.LO GAIN knob
This adjusts the LO gain in a range of -15.0 dB – +15.0 dB.
In the M-48 GROUP MIX popup, the function buttons perform
the following tasks.

Advertisement

Table of Contents
loading

Table of Contents