Operations Using The Channel Edit Section - RSS M-380 Owner's Manual

Operations using the
CHANNEL EDIT section
Most input channel operations can be performed in the CHANNEL
EDIT section.
Here we will explain input channel operations using the CHANNEL
EDIT section.
fig.ChEditSection.eps
Selecting the channel to edit
1.
In the fader module section, press a [SEL] button to select
the input channel that you want to edit.
fig.SELBtn.eps
[ SEL ]
Input channel operations
2.
The selected channel is shown in the channel indication at
the upper center of the screen.
fig.ScrSelectedCh.eps
If you've pressed [TOUCH SELECT] to turn it on (lit), you can
select a channel by touching its fader.
Viewing the parameter values
The arrangement of parameters and the color of knobs in the
CHANNEL EDIT DISPLAY screen is close to that of the CHANNEL
EDIT section, making it easy to check the values.
1.
In the CHANNEL EDIT section, press [CH DISP].
The CHANNEL DISPLAY screen will appear.
fig.ScrChDisp.eps
Even if you don't access the CHANNEL DISPLAY screen, the
value of the currently-operated parameter is shown in the sub
display area when you operate an dial in the CHANNEL EDIT
section.
fig.SubDispPrm.eps
Preamp gain adjustments
Use the PREAMP area of the CHANNEL EDIT section to adjust the
preamp gain.
fig.ChEdtPreamp.eps
1.
Use the GAIN dial to adjust the preamp gain.
43