RSS M-380 Owner's Manual page 218

Appendix
LO Q
Steepness of the frequency response curve at the Lo band center
frequency (*1)
Value: 0.36–16.00
LO-MID TYPE
Filter type for the Lo-Mid band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
LO-MID GAIN
Gain of the Lo-Mid band (*1)
Value: -15.0–+15.0 dB
LO-MID FREQ
Center frequency of the Lo-Mid band (*1)
Value: 20 Hz–20.00 kHz
LO-MID Q
Steepness of the frequency response curve at the Lo-Mid band center
frequency (*1)
Value: 0.36–16.00
HI-MID TYPE
Filter type for the Hi-Mid band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
HI-MID GAIN
Gain of the Hi-Mid band (*1)
Value: -15.0–+15.0 dB
HI-MID FREQ
Center frequency of the Hi-Mid band (*1)
Value: 20 Hz–20.00 kHz
HI-MID Q
Steepness of the frequency response curve at the Hi-Mid band center
frequency (*1)
Value: 0.36–16.00
HI TYPE
Filter type for the Hi band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
HI GAIN
Gain of the Hi band (*1)
Value: -15.0–+15.0 dB
HI FREQ
Center frequency of the Hi band (*1)
Value: 20 Hz–20.00 kHz
218
HI Q
Steepness of the frequency response curve at the Hi band center
frequency (*1)
Value: 0.36–16.00
S
(*1) Depending on the Type setting of each band, there are certain
combinations for which the Freq, Gain, and Q values will have no
effect, as listed below.
PEAK (Peaking)
Creates a hill or valley in the region of FREQ.
Freq: Valid Gain: Valid
LSV (Low Shelving)
Boosts/cuts the region below FREQ
Freq: Valid Gain: Valid
HSV (High Shelving)
Boosts/cuts the region above FREQ
Freq: Valid Gain: Valid
LPF1 (Low-Pass Filter 1)
Passes the frequency region below FREQ
Freq: Valid Gain:-
HPF1 (High-Pass Filter 1)
Passes the frequency region above FREQ
Freq: Valid Gain:-
LPF2 (Low-Pass Filter 2)
A sharper response curve than LPF1
Freq: Valid Gain:-
HPF2 (High-Pass Filter 2)
A sharper response curve than HPF1
Freq: Valid Gain:-
BPF (Band Pass Filter)
Passes the frequency region around FREQ.
Freq: Valid Gain:-
BEF (Band Eliminate Filter)
Removes the frequency region around FREQ
Freq: Valid Gain:-
THRU (Thru)
Passes all frequency regions
Freq:- Gain:-
Q: Valid
Q:-
Q:-
Q:-
Q:-
Q: Valid
Q: Valid
Q: Valid
Q: Valid
Q:-