LCR SYSTEM
• MAIN L+C, MAIN R+C
fig.SELMainL_C_R_C.eps
"MAIN L+C" and "MAIN R+C" are shown for the input-source
channel select button of the RECORDER SOURCE SELECT
popup. These respectively indicate a mono mix of MAIN L and
MAIN C, and a mono mix of MAIN R and MAIN C.
How invalid choices are displayed
fig.InvalidSel.eps
Choices (channels or parameters) that would be invalid because of
the LCR SYSTEM setting are shown with a blank name of "---."
AUX SEND indication
fig.invalidSend.eps
Sends to the AUX used by the LCR SYSTEM as MAIN C are
indicated as "MAIN C," and cannot be operated.
FROM AUX send indication in MATRIX
fig.FromMainC.eps
The send from the AUX used by the LCR SYSTEM as MAIN C
to the MATRIX is indicated as "C." This can be used as a send
from MAIN C to a MATRIX.
140
Output patchbay
LCR SYSTEM OFF
fig.PB_Guide.eps
The channel that is "MAIN MONO" when LCR SYSTEM is off
will change to "MAIN C" when LCR SYSTEM is on.
LCR SYSTEM ON