RSS M-380 Owner's Manual page 168

Remote
In the V-LINK SOURCE CHANNEL SELECT popup, the
function buttons perform the following operations.
[F1 (CH1–24)]
[F2 (CH25–48)]
[F6 (SELECT NONE)]
[F8 (CLOSE)]
6.
Move the cursor to the desired channel, and press [ENTER]
to select it.
If you're using a stereo source, specify one of the stereo-linked
channels.
7.
Press [F8 (CLOSE)] to close the V-LINK SOURCE CHANNEL
SELECT popup.
8.
Move the cursor to MaxLev in the desired SOURCE field,
and use the value dial to specify the maximum level of the
channel.
9.
Move the cursor to MinLev in the desired SOURCE field,
and use the value dial to specify the minimum level of the
channel.
10. Move the cursor to the V-LINK button and press [ENTER] to
turn it on.
USB MIDI settings
To make USB MIDI settings, use the USB MIDI tab of the REMOTE
popup.
1.
In the SETUP section, press [SYSTEM] to access the
SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F4 (REMOTE)].
The REMOTE popup will appear.
168
Displays CH1–CH24 as the
SOURCE CHANNEL select but-
tons.
Displays CH25–CH48 as the
SOURCE CHANNEL select but-
tons.
Clears the source channel selection.
Closes the popup.
3.
Press [F2 (USB MIDI)].
fig.ScrSysRemoteUSBGuide.eps
A B C
The USB MIDI tab will appear.
A.Dev ID knob
This specifies the device ID of the M-380 in a range of 1–32.
This setting is common to the MIDI tab, the USB MIDI tab,
and the V-LINK tab.
B.RECEIVE select buttons
These buttons select the items that USB MIDI will receive.
FADER, MUTE Change (CC)
SCENE Change (PC)
Sys Ex
MMC
C.SEND select buttons
These buttons select the items that USB MIDI will transmit.
FADER, MUTE Change (CC)
SCENE Change (PC)
Sys Ex
4.
Move the cursor to the Dev ID knob and specify the device
ID.
5.
Move the cursor to the RECEIVE select buttons for each
item that you want USB MIDI to receive, and press [ENTER]
to select the button.
6.
Move the cursor to the SEND select buttons for each item
that you want USB MIDI to transmit, and press [ENTER] to
select the button.
Fader and mute changes
(control changes)
Scene changes
(program changes)
System exclusive
MMC for the USB memory
recorder
Fader and mute changes
(control changes)
Scene changes
(program changes)
System exclusive