Reac Settings - RSS M-380 Owner's Manual

REAC applications and settings
Recording to a PC via the SPLIT/
BACKUP port
You can use a REAC driver with SONAR DAW software to record
from the M-380's SPLIT/BACKUP port to your computer.
For details, refer to the following website.
http://www.cakewalk.com/
DIGITAL IN
S-1608
PC
to Ethernet connector
SLAVE
FOH CONSOLE
fig.REACAES-EBU_2.eps
S-4000S
SLAVE
PC
to Ethernet connector
FOH CONSOLE
162
S-1608
SLAVE

REAC settings

The REAC CONFIG popup of the SYSTEM screen is used to make
REAC settings.
The SETUP tab of the REAC CONFIG popup is used to make REAC
settings for the M-380.
1.
In the SETUP section, press [SYSTEM] to access the
SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F2 (REAC CONFIG)].
The REAC CONFIG popup will appear.
3.
Press [F1 (SETUP)] to access the SETUP tab.
fig.ScrSysReacConf1Guide.eps
A B
A.REAC SETUP select buttons
These buttons select REAC settings appropriate for the
desired application.
B.Setup indication
This area shows the content of the REAC SETUP select buttons
at cursor location, and the types of connections.
4.
Move the cursor to the REAC SETUP select buttons, select
the desired application, and press [ENTER].
You can choose from the following applications.
FOH Use the M-380 as a FOH (Front Of House)
console. Normally, you should choose
this setting.
MONITOR/ Use the M-380 as a monitor console or
BROADCAST A broadcast console. The split (distribution)
from FOH will be received at REAC A.
BACKUP Connect the S-4000S using backup con-
(S-4000S) nections.
For details on example connections for various applications,
refer to "REAC connection examples" (p. 159).