Saving/Loading Usb Memory - RSS M-380 Owner's Manual

2.
In the library list, select the library item that you want to
clear.
3.
Press [F6 (CLEAR)].
fig.ScrM48LibDel_Conf.eps
A confirmation message will ask you to confirm the operation.
In this example, library item number 2 is being cleared.
4.
Press [F8 (CLEAR)].
The library item you selected in step 2 will be cleared.
Pressing [F7 (CANCEL)] will cancel the operation.
Management of the M-48 live personal mixer
Saving/loading USB
memory
This loads or stores all data saved in M-48 units as M-48 project files
on USB memory.
Accessing the M-48 LOAD/SAVE
popup
1.
Access the M-48 MANAGER popup (p. 187).
fig.ScrM48Manager.eps
2.
Press [F5 (LOAD/SAVE)].
The M-48 LOAD/SAVE popup will appear.
fig.ScrM48LoaSave_Guide.eps
A
A.Target unit list
This list shows the M-48 units to which the load or save
operation will apply.
The list shows the following items.
Item
MARK
NO.
UNIT NAME
B.Project file list
This lists the M-48 project files that have been saved to USB
memory. You can specify the save-destination folder for the
project file, or specify the project file that you want to load.
In the M-48 LOAD/SAVE popup, the function buttons perform
the following tasks.
B
Explanation
Add check marks to this column if you
want to load or save data for multiple M-
48 units. Pressing [ENTER] will add or re-
move the check mark.
Indicates the number in the list.
Indicates the unit name.
205