Using The Eq Library - RSS M-380 Owner's Manual

Four-band EQ

Using the EQ library

You can recall four-band EQ and filter settings from the library, or
store the current four-band EQ and filter settings to the library.
The EQ LIBRARY popup is used to perform EQ library operations.
1.
Access the EQUALIZER popup.
2.
Press [F4 (LIBRARY)] to access the EQ LIBRARY popup.
fig.PopEQLibGuide.eps
A
A.Channel indication
This indicates the channel to which the EQ LIBRARY popup
applies.
B.Library data list
This is a list of the library data.
C.Recall parameter select buttons
These select the section that will be recalled.
If you're recalling to the MAIN L/R channels or AUX channels,
filter data will not be recalled.
In the EQ LIBRARY popup, the function buttons perform the
following operations.
[F1 (PRESET)] Displays the recall-only PRESET li-
brary.
[F2 (USER)] Displays the USER library, which
lets you recall or store data.
[F3 (PREVIEW)] Previews (auditions) the selected li-
brary data.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)]* Stores settings to the selected library
data.
[F6 (LOCK)]* Locks the selected library data.
[F7 (NAME EDIT)]* Accesses the NAME EDIT popup for
editing the name of the selected user
library data.
[F8 (CLOSE)] Closes the popup.
* Available only for the User library.
86
B C
For details on library operations, refer to "Library operations"
(p. 39).
Noise may occur when you preview or recall a library item, but
this is not a malfunction.
When you store the EQ settings of the MAIN L/R channels or
an AUX channel into the User library, the default filter values
will be stored.
Setting the four-band EQ to a flat
state
1.
Access the EQUALIZER popup.
fig.PopEQ.eps
2.
Press [F6 (FLAT)].
fig.ScrEQFlatConf.eps
A confirmation message will ask you to confirm the operation.
3.
Press [F8 (FLAT)]; the gain of the LO, LO-MID, HI-MID, and
HI bands will be set to 0.0 dB.
If you press [F7 (CANCEL)], the operation will be cancelled.