Using The Channel Library - RSS M-380 Owner's Manual

5.
Press [F3 (PASTE to CH 1–24)] or [F3 (PASTE to CH 25–48)].
A confirmation message will appear, asking you to confirm the
Copy operation.
6.
Press [F8 (PASTE)] to execute the Copy.
If you press [F7 (CANCEL)], the operation will be cancelled.
7.
Press [F8 (CLOSE)] to close the popup.
When you execute PASTE, the copy-destination channel select
buttons will be cleared.

Using the channel library

You can recall channel settings from the library, or store the settings
of the current channel in the library.
Channel library operations are performed in the CHANNEL LIBRARY
popup.
Accessing the CHANNEL LIBRARY
popup
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChDisp.eps
2.
Press [F4 (LIBRARY)] to access the CHANNEL LIBRARY
popup.
For details on library operations, refer to "Library operations" (p. 39).
Input channel operations
fig.ScrChLibGuide.eps
A
A.Target channel
This indicates the channel that is the target of the CHANNEL
LIBRARY popup.
B.Library data list
This is a list of the library data.
C.Recall parameter select buttons
Use these to select the parameters that will be recalled. You
can select the following parameters.
Phase Phase
ATT Attenuator
Filter Filter
Gate Gate/expander
Comp Compressor
EQ Four-band EQ
Sends AUX sends
Direct Out Direct out point
Fader Fader
Pan Pan
LCR
LCR button, Centr*
* When the LCR SYSTEM is on
Noise may occur when you execute a library preview or recall,
but this is not a malfunction.
The function buttons have the following operations.
[F1 (PRESET)] Displays the recall-only PRESET li-
brary.
[F2 (USER)] Displays the USER library, which can
be recalled or stored.
[F3 (PREVIEW)] Previews (auditions) the selected li-
brary data.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)]* Stores the settings of the current chan-
nel into the selected library data.
[F6 (LOCK)]* Locks or unlocks the selected library
data.
[F7 (NAME ED- Accesses the NAME EDIT popup,
IT)]* where you can edit the name of the se-
lected library data.
[F8 (CLOSE)] Closes the popup.
* Available only for the User library.
B C
53