RSS M-380 Owner's Manual page 77

A.Overview
This shows the overall gate/expander status for CH1–CH48.
fig.ScrGateOverviewGuide2.eps
a
b
c
d
e
f
a.Channel number
b.ON switch
Turns the gate/expander on or off.
c.Type indication
Indicates the currently selected type.
d.Gate/expander graph
Shows the approximate response of the gate/expander.
e.GR meter
Shows the amount of gain reduction for the gate/expander.
f.THR knob
Adjusts the threshold level of the gate/expander in a range
of -80.0 dB–0.0 dB.
B.GATE REMAIN indication
Indicates the remaining number of gate/expander units that
can be turned on. If this indicates 0, no further units can be
turned on.
Stereo-linked channels will use two gate/expander units. This
means that if the GATE REMAIN indication is 1, you won't be
able to turn on the gate/expander for a stereo-linked channel.
If you enable stereo linking for a channel when the GATE
REMAIN indication is 0, and this would cause the number of
gate/expander units to exceed 24, the gate/expander for that
channel will be turned off.
If you attempt to turn on more than twenty-four gate/expander
units, the following warning message will appear, and no
further units can be turned on.
fig.ScrGateOvMsg.eps
In the GATE/EXPANDER OVERVIEW popup, the function
buttons perform the following operations.
[F8 (CLOSE)] Closes the popup.
Using the gate/expander library
You can recall gate/expander settings from the library, or store the
current gate/expander settings in the library.
The GATE/EXP LIBRARY popup is used to perform gate/expander
library operations.
1.
Access the GATE/EXPANDER popup.
fig.PopGate.eps
2.
Press [F4 (LIBRARY)] to access the GATE/EXP LIBRARY
popup.
fig.PopGateLibGuide.eps
A
A.Channel indication
This indicates the channel to which the GATE/EXP LIBRARY
popup applies.
B.Library data list
This is a list of the library data.
Dynamics
B
77