Editing The Scene List - RSS M-380 Owner's Manual

Editing the scene list

The SCENE LIST EDIT popup is used to edit the scene list.
Accessing the SCENE LIST EDIT
popup
1.
Access the SCENE screen.
fig.ScrSceneList.eps
2.
Press [F3 (LIST EDIT)].
The SCENE LIST EDIT popup will appear.
fig.ScrSceneListMoveGuide.eps
A
In the SCENE LIST EDIT popup you can edit the scene names,
and copy, cut, paste, insert, or clear scenes in the list.
A.Scene list
This is a list of the scenes.
In the SCENE LIST EDIT popup, the function buttons perform
the following operations.
Button Function
[F1 (NAME EDIT)] Accesses the NAME
EDIT popup, where you
can edit the scene name.
[F2 (COPY)] Copies the scene select-
ed in the scene list.
[F3 (CUT)] Cuts (removes) the
scene selected in the
scene list.
[F4 (PASTE)] Pastes the copied or cut
scene to the selected
number.
[F5 (INSERT)] Inserts the copied or cut
scene to the selected
number.
[F6 (CLEAR)] Erases the content of the
scene selected in the
scene list, returning it to
a blank scene.
[F7 (LOCK)] Locks or unlocks the
scene that's selected in
the scene list.
[F8 (CLOSE)] Closes the popup.
When you use [F2 (COPY)] or [F3 (CUT)], the contents of the
selected scene will be temporarily saved in the clipboard. [F4
(PASTE)] or [F5 (INSERT)] paste or insert the contents that were
saved in the clipboard. The contents of the clipboard will
disappear when you close the SCENE LIST EDIT popup.
Editing the name of a scene
You can assign a name of up to sixteen characters to each scene.
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the scene whose name you want
to edit.
3.
Press [F1 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4.
Move the cursor to the name edit field, and edit the scene
name.
5.
Press [F8 (CLOSE)] to close the popup.
For details on name editing, refer to "Editing a name" (p. 39).
You can't edit the name of a scene that is locked.
Scene memory
Reference
page
p. 129
p. 130
p. 130
p. 130
p. 130
p. 130
129