14. Monitor Section; 15. Group Section; 16. Scene Memory Section; 17. Usb Memory Connector - RSS M-380 Owner's Manual

14. MONITOR section

fig.MonitorSectGuide.eps
A
B
C
A. LEVEL knob
This adjusts the monitor output level in a range of -Inf dB –
+10.0 dB.
B.
DISP button
This button accesses the MONITOR screen where you can make
monitor or solo settings. It will light red while the screen is
shown.
C.
SOLO CLEAR button
This button clears (turns off) the solo settings of all channels in a
single operation.

15. GROUP section

fig.GroupSectGuide.eps
A. DCA button
This button accesses the DCA GROUP screen where you can
control the DCA groups and make settings for them. It will light
red while the screen is shown.
B.
MUTE button
This button accesses the MUTE GROUP screen where you can
control the mute groups and make settings for them. It will light
red while the screen is shown.
Explanation of the panels

16. SCENE MEMORY section

fig.SceneMemSectGuide.eps
• DISP button
This button accesses the SCENE screen where you can manage
the scene list and make scene settings. It will light red while the
screen is shown.
Holding down [SHIFT] and pressing [DISP] displays the
SCENE QUICKVIEW popup (p. 128).

17. USB MEMORY connector

fig.USBMemoryGuide.eps
You can connect USB memory to this connector.
Before you disconnect USB memory, make sure that data is not
being written to USB memory or being read from it. If you
disconnect USB memory while these operations are occurring,
you risk damaging the data.

18. PHONES jack

You can connect a set of headphones to this jack, and use it to
monitor the MONITOR L/R audio signal.

19. PHONES LEVEL knob

This adjusts the output level to the headphones connected to the
PHONES jack.
29