Inserting An External Effects Device; About Inserting An External Effects Device - RSS M-380 Owner's Manual

Inserting an external effects device

About inserting an external effects device

fig.ExtInsDia.eps
CH 1 EXT FX INSERT OUT
CH 48 EXT FX INSERT OUT
AUX 1 EXT FX INSERT OUT
AUX 16 EXT FX INSERT OUT
MATRIX 1 EXT FX INSERT OUT
MATRIX 8 EXT FX INSERT OUT
MAIN L EXT FX INSERT OUT
MAIN R EXT FX INSERT OUT
You can use the CONSOLE IN 1–8 and CONSOLE OUT 1–8 jacks located on the M-380's rear panel to insert up to eight external effects devices
into channels.
The eight external effects devices are shown virtually as an EXT FX1–EXT FX8 rack, allowing you to adjust the input levels and insert them into
channels.
EXT FX1–EXT FX8 use the following input/output jacks.
External effect Output jack
EXT FX1 CONSOLE OUT 1
EXT FX2 CONSOLE OUT 2
EXT FX3 CONSOLE OUT 3
EXT FX4 CONSOLE OUT 4
EXT FX5 CONSOLE OUT 5
EXT FX6 CONSOLE OUT 6
EXT FX7 CONSOLE OUT 7
EXT FX8 CONSOLE OUT 8
To insert external effects devices into channels, you'll use the EXT FX 1–4 tab and EXT FX 5–8 tab of the EFFECTS screen.
EXT
INSERT
CONSOLE INPUT 1-8
OUT
SEND
LEVEL
SEND
LEVEL
EXT FX 1-8
Input jack
CONSOLE IN 1
CONSOLE IN 2
CONSOLE IN 3
CONSOLE IN 4
CONSOLE IN 5
CONSOLE IN 6
CONSOLE IN 7
CONSOLE IN 8
EXT
INSERT
IN
RETURN
LEVEL
RETURN
LEVEL
CONSOLE OUTPUT 1-8
To CH 1 EXT FX INSERT IN
To CH 48 EXT FX INSERT IN
To AUX 1 EXT FX INSERT IN
To AUX 16 EXT FX INSERT IN
To MATRIX 1 EXT FX INSERT IN
To MATRIX 8 EXT FX INSERT IN
To MAIN L EXT FX INSERT IN
To MAIN R EXT FX INSERT IN
111