RSS M-380 Owner's Manual page 220

Appendix
HI FREQ DAMP FREQ
Frequency at which the high-frequency region of the reverb sound
begins to be attenuated
Value: 200 Hz–20.00 kHz
HI CUT FREQ
Frequency at which the high-frequency region of the reverb sound
will be cut
Value: 200 Hz–20.00 kHz
WET (Wet Level)
Level of the reverb sound
Value: -INF–+6.0 dB
DRY (Dry Level)
Level of the original sound
Value: -INF–+6.0 dB
EQ
EQ SW (EQ switch)
Turns the EQ on/off
Value: OFF, ON
EQ ATT (EQ attenuator)
Attenuator for the EQ
Value: -42.0–+6.0 dB
LOW TYPE
Filter type for the Lo band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
LO GAIN
Gain of the Lo band (*1)
Value: -15.0–+15.0 dB
LO FREQ
Center frequency of the Lo band (*1)
Value: 20 Hz–20.00 kHz
LO Q
Steepness of the frequency response curve at the Lo band center
frequency (*1)
Value: 0.36–16.00
LO-MID TYPE
Filter type for the Lo-Mid band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
LO-MID GAIN
Gain of the Lo-Mid band (*1)
Value: -15.0–+15.0 dB
220
LO-MID FREQ
Center frequency of the Lo-Mid band (*1)
Value: 20 Hz–20.00 kHz
LO-MID Q
Steepness of the frequency response curve at the Lo-Mid band center
frequency (*1)
Value: 0.36–16.00
HI-MID TYPE
Filter type for the Hi-Mid band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
HI-MID GAIN
Gain of the Hi-Mid band (*1)
Value: -15.0–+15.0 dB
HI-MID FREQ
Center frequency of the Hi-Mid band (*1)
Value: 20 Hz–20.00 kHz
HI-MID Q
Steepness of the frequency response curve at the Hi-Mid band center
frequency (*1)
Value: 0.36–16.00
HI TYPE
Filter type for the Hi band (*1)
Value: PEAK, LSV, HSV, LPF1, HPF1, LPF2, HPF2, BPF,
BEF, THRU
HI GAIN
Gain of the Hi band (*1)
Value: -15.0–+15.0 dB
HI FREQ
Center frequency of the Hi band (*1)
Value: 20 Hz–20.00 kHz
HI Q
Steepness of the frequency response curve at the Hi band center
frequency (*1)
Value: 0.36–16.00
(*1) Depending on the Type setting of each band, there are certain
combinations for which the Freq, Gain, and Q values will have no
effect, as listed below.
PEAK (Peaking)
Creates a hill or valley in the region of FREQ.
Freq: Valid Gain: Valid Q: Valid