RSS M-380 Owner's Manual page 60

AUX channel and MAIN L/R channel operations
e. LO FREQ knob
This adjusts the center frequency of the LO band in the range of
20 Hz–1.00 kHz.
f. FREQ knobs (LO-MID, HI-MID)
These adjust the center frequency of the LO-MID and HI-MID
bands in the range of 20 Hz–20.0 kHz.
g. HI FREQ knob
This adjusts the center frequency of the HI band in the range of
1.00 kHz–20.0 kHz.
h. GAIN knobs (LO, LO-MID, HI-MID, HI)
These adjust the gain of the LO, LO-MID, HI-MID, and HI
bands in the range of -15.0 dB–+15.0 dB.
For detailed settings for the four-band EQ, refer to "Four-band
EQ operations" (p. 84).
5.
MTX send
fig.ScrMtxSends.eps
• MATRIX sends 1–8
These adjust the send from AUX1–AUX16 or MAIN L/R to
MATRIX1–MATRIX8. The MATRIX send area is structured as
follows.
fig.ScrMtxSendField.eps
a
b
c
a. MATRIX number
This indicates the MATRIX channel number.
b. MATRIX name
This indicates the MATRIX channel name.
c. Send level bar
This adjusts the send level to each MATRIX in the range of -Inf
dB–+10.0 dB.
The color of the level bar indicates the send point or status of
the send switch as follows.
Color of the Status
send level bar
Blue send point is PRE EQ or PRE FADER
Green send point is POST FADER
Gray Send switch is off
60
• MATRIX pan slider
fig.ScrMtxSendField2.eps
If the send-destination is a stereo-linked pair of MATRIX
channels, this slider adjusts the left/right position in the range
of L63–R63. This is shown for the odd-numbered MATRIX
send.
For detailed MATRIX send settings, refer to "MATRIX send
operations" (p. 89).
6.
MATRIX send point
fig.ScrMtxSendPoint.eps
These select the point from which signal is sent to MATRIX1–
MATRIX8.
The selected item corresponds to the send point as follows.
PRE EQ Send from the pre-EQ point
PRE FD Send from the pre-fader point
PST FD Send from the post-fader point
7.
AUX send (MAIN L/R only)
fig.ScrChSends.eps
• AUX sends 1–16
These adjust the send from MAIN L/R to AUX1–AUX16. The
AUX send area is structured as follows.
fig.ScrChSendField.eps
a
b
c
a. AUX number
This indicates the AUX channel number.
b. AUX name
This indicates the AUX channel name.