Aux Send/Matrix Send; Aux Send Operations - RSS M-380 Owner's Manual

AUX send/MATRIX send

AUX send operations

The AUX sends are used to send audio signals from input channels or the MAIN L/R channels to AUX1–AUX16.
fig.InBlkSends.eps
AUX SENDS (CH1 - CH48)
PRE EQ PRE FADER
MUTE
4BAND
EQ
fig.MainBlkSends.eps
AUX SENDS (MAIN L/R)
PRE EQ PRE FADER
FADER BAL
MUTE
4BAND
EQ
The AUX SENDS popup is used to perform AUX send operations.
1.
In the fader module section, press a [SEL] button to select
the desired channel.
2.
In the AUX SENDS area of the CHANNEL EDIT section,
press [DISP].
The AUX SENDS popup will appear.
fig.PopAuxSends.eps
POST FADER
MAIN
FADER PAN SW
AUX SEND 1-16
SW SEND
PRE EQ
PRE FADER
POST FADER
SW SEND
PRE EQ
PRE FADER
POST FADER
POST FADER OUTPUT LEVEL
GEQ
INSERT
LIMITER
AUX SEND 1-16
SW SEND
PRE EQ
PRE FADER
POST FADER
PAN
SW SEND
PRE EQ
PRE FADER
POST FADER
MAIN AUX SOLO
L R 1 2 16 L R
AUX
LINK
TO AUX
1, 3...15
PAN
TO AUX
2, 4...16
L R 1 2 16 L R
MAIN AUX SOLO
AUX
LINK
TO AUX 1, 3...7
TO AUX 2, 4...8
You can use the tabs in the AUX SENDS popup to switch
between two display pages: sends to AUX1–AUX8 (SENDS 1-8)
or sends to AUX9–AUX16 (SENDS 9-16).
• AUX sends 1–8, AUX sends 9–16
These adjust the sends from the CH to AUX. The AUX send
area is structured as follows.
fig.PopAuxSendFieldGuide.eps
A B
A.AUX number and name
This indicates the AUX channel number and name.
B.Send level bar
This adjusts the send level to AUX in a range of -Inf dB–+10.0
dB.
C D E
87