Assigning A Channel To A Dca Group; Specifying A Name And Color Label For The Dca Group - RSS M-380 Owner's Manual

Assigning a channel to a
DCA group
The DCA GROUP ASSIGN popup is used to assign a channel to a
DCA group.
You can also use the GROUP ASSIGN popup of the CHANNEL
DISPLAY screen to assign a channel to a DCA group. For
details, refer to "Assigning channels to DCA groups and MUTE
groups" (p. 54).
Accessing the DCA GROUP ASSIGN
popup
1.
In the GROUP section, press [DCA] to access the DCA
GROUP screen.
2.
Move the cursor to the DCA group fader of the desired DCA
group, and press [F8 (ASSIGN)].
The DCA GROUP ASSIGN popup will appear.
fig.ScrDCAGroupAssignGuide.eps
A B
A.Target DCA group indication
This indicates the DCA group to which the settings in the
DCA GROUP ASSIGN popup will apply.
B.Channel select buttons
Here you can select the channels that will be assigned to the
DCA group.
In the DCA GROUP ASSIGN screen, the function buttons
perform the following operations.
[F1 (CH 1–24)]
[F2 (CH 25–48)]
[F3 (AUX/MAIN/MARIX)]
[F8 (CLOSE)]
You can use [SEL] to access the DCA GROUP ASSIGN popup
even from the AUX13-16/MTX layer or the user layer.
Displays CH1–CH24 as the
channel select buttons.
Displays CH25–CH48 as the
channel select buttons.
Displays AUX1–AUX16,
MATRIX1–MATRIX8, MAIN
L/R and MAIN C as the
channel select buttons.
Closes the popup.
Assigning a channel to a DCA
group
1.
Access the DCA GROUP ASSIGN popup for the desired
DCA group.
fig.ScrDCAGroupAssign.eps
2.
Verify that the target DCA group is correct.
3.
Move the cursor to the desired channel select button, and
press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
When the DCA GROUP ASSIGN popup is displayed, you can
press a top panel [SEL] to turn on/off the corresponding
channel's assignment to the DCA group.
Specifying a name and color
label for the DCA group
You can specify a name and color label for each DCA group. A name
of up to six characters can be specified, and you can choose one of
eight colors as the color label.
The NAME EDIT popup is used to edit the name and select a color label.
For details on name editing, refer to "Specifying a channel name
and color label" (p. 51).
Accessing the NAME EDIT popup
1.
Access the DCA GROUP screen.
2.
Move the cursor to the DCA group fader of the desired DCA
group, and press [F7 (NAME EDIT)].
fig.ScrChNameEdit.eps
The NAME EDIT popup will appear.
DCA groups
115