RSS M-380 Owner's Manual page 61

c. Send level bar
This adjusts the send level to each AUX in the range of -Inf dB–
+10.0 dB.
The color of the level bar indicates the send point or status of
the send switch as follows.
Color of the
Status
send level bar
Blue send point is PRE EQ or PRE FADER
Green send point is POST FADER
Gray Send switch is off
• AUX pan slider
fig.ScrChSendField2.eps
If the send-destination is a stereo-linked pair of AUX channels,
this slider adjusts the left/right position in the range of L63–
R63. This is shown for the odd-numbered AUX send.
For detailed AUX send settings, refer to "AUX send operations"
(p. 87).
Sends to the AUX used by the LCR SYSTEM as MAIN C are
indicated as "MAIN C," and cannot be operated.
fig.ScrChSendField2.eps
8.
TO MAIN (AUX channels only)
fig.ScrChMainSend.eps
a
b
c
d
These specify the amount of signal that will be sent from the
AUX channel to MAIN L/R, and the send point.
a. ON button
This turns the send to MAIN L/R on/off.
b. PAN knob
This adjusts the left/right pan to MAIN L/R in the range of
L63–R63.
AUX channel and MAIN L/R channel operations
c. LEVEL knob
This adjusts the send level to MAIN L/R in the range of-Inf dB–
+10.0 dB.
d. MAIN send point
These select the point from which the signal is sent to MAIN L/
R.
The selected item corresponds to the send point as follows.
PRE EQ
PRE FD
PST FD
If this is set to POST FADER, muting the AUX channel will also
mute the send to the MAIN L/R channel. If this is set to PRE EQ
or PRE FADER, muting the AUX channel will not affect the
send to the MAIN L/R channel.
9.
Balance
fig.ScrChBal.eps
This adjusts the left/right output balance sent from MAIN L/R
or stereo-linked AUX channels in the range of L63–R63.
10. Group
fig.ScrChGroup.eps
By moving the cursor to DCA GROUP or MUTE GROUP and
pressing [ENTER], you can access the GROUP ASSIGN popup
where you can make DCA group and MUTE group
assignments.
You can also access the GROUP ASSIGN popup window by
pressing [F5 (GROUP ASSIGN)].
11. Fader
fig.ScrChFaderOut.eps
Send from the pre-EQ point
Send from the pre-fader point
Send from the post-fader point
a
d
b
c
61