Dca Groups; About Dca Groups; Dca Group Settings - RSS M-380 Owner's Manual

DCA groups

About DCA groups

DCA grouping is a function that lets you make relative adjustments
to the output level of channels so that the level of multiple channels
belonging to a group can be controlled together.
fig.DCAGuide.eps
Faders assigned to DCA
-3dB offset to each channel
A channel can belong to more than one DCA group. This is
convenient when grouping drums or instruments.
114
The DCA GROUP screen is used to make DCA group settings.
f
1.
DCA Fader
ig.ScrDCAGroupGuide.eps
-3dB

DCA group settings

Accessing the DCA GROUP screen
In the GROUP section, press [DCA].
The DCA GROUP screen will appear.
A
A.DCA group 1–8 faders
These adjust the levels of DCA groups 1–8 in a range of -Inf
dB–+10.0 dB.
In the DCA GROUP screen, the function buttons perform the
following operations.
[F6 (DCA 1-8 If this is on, the top panel
ON FADER) fader modules 5–12 will con-
trol DCA groups.
[F7 (NAME EDIT)] Accesses the NAME EDIT
popup.
[F8 (ASSIGN)] Accesses the DCA GROUP
ASSIGN popup.
The functions of the fader modules when [F6 (DCA1-8 ON
FADER)] is switched on are as described below.
Controller Operation
[SEL] Accesses the DCA GROUP ASSIGN pop-
up
[SOLO] Solos the DCA group.
[MUTE] Mutes the DCA group.
Fader Adjusts the level of the DCA group.
When you access the DCA GROUP ASSIGN popup, the [F6
(DCA1-8 ON FADER)] function will be temporarily disabled.
p. 115
p. 115