Momentarily Displaying The Scene List - RSS M-380 Owner's Manual

Scene memory
Item Explanation
BUS AUX channel, MAIN L/R channel,
MAIN C channel, and MATRIX chan-
nel settings
EFFECTS Effect, 31-band GEQ, and external ef-
fect insertion settings
DCA/MUTE DCA group and MUTE group settings
GROUP
Recorder USB memory recorder settings
Talkback/OSC Talkback and oscillator settings
In the RECALL PARAMETER EDIT popup, the function
buttons perform the following tasks.
Button Operation
[F1 (RECALL FILTER)] Turns the recall filter on/off.
[F7 (CANCEL)] Cancels the changes and closes the
popup.
[F8 (OK)] Finalizes the changes and closes the
popup.
3.
Press [F1 (RECALL FILTER)] to turn it on.
4.
Use the RECALL PARAMETERS select buttons to add a
check mark to the parameters that you want to recall.
5.
Press [F8 (OK)] to finalize the changes and close the popup.
If you press [F7 (CANCEL)], your changes will be cancelled and
the popup will close.
128
Momentarily displaying the
scene list
While carrying out other operations, you can temporary display the
scene list and perform scene memory operations.
1.
Hold down [SHIFT] and press [DISP] in the SCENE
MEMORY section.
The SCENE QUICKVIEW popup is accessed.
A
A.Scene list
This lists the scenes. The current scene is shown in green.
The items listed are the same as for the SCENE screen (p. 125).
The functions of the function buttons on the SCENE
QUICKVIEW popup are as shown below.
Button Operation
[F1 (RECALL)] This recalls the mixer pa-
rameters from the current-
ly selected scene number.
[F2 (STORE)] This stores the current mix-
er parameters into the cur-
rently selected scene
number.
[F4 (CLEAR)] Clears the contents of the
scene selected in the scene
list, making it a blank
scene.
[F6 (LOCK)] Locks or unlocks the scene
selected in the scene list.
[F7 (UNDO RECALL)] Undoes (cancels) the last-
performed recall.
[F8 (CLOSE)] Closes the popup.
You can also make the setting for accessing the popup from a
USER button (p. 154).
See
page
p. 127
p. 126
p. 130
p. 127