Stereo-Linking Matrix Channels - RSS M-380 Owner's Manual

The function buttons have the following operations.
[F1 (LINK)] Turns channel link on/off.
[F2 (NAME EDIT)] Accesses the NAME EDIT popup
where you can specify the chan-
nel name.
[F5 (GROUP ASSIGN)] Accesses the GROUP ASSIGN
popup where you can make DCA
group and MUTE group assign-
ments.
[F6 (PEAK CLEAR)] Clears the level meter peak hold
or over indication.
[F7 (COPY MIX)] Copies the mix of a MATRIX
channel to another MATRIX
channel.
[F8 (Patchbay)] Accesses the PATCHBAY screen.
If you press [F8 (Patchbay)] to access the PATCHBAY screen,
the currently selected channel will be highlighted in the
PATCHBAY screen.
Accessing the CHANNEL DISPLAY
screen
1.
As described in "MATRIX channel operations" (p. 67),
select the MATRIX channel that you want to operate.
2.
In the CHANNEL EDIT section, press [CH DISP] to access
the CHANNEL DISPLAY screen.
fig.ScrChDispMtx.eps
Stereo-linking MATRIX
channels
p. 51
You can stereo-link adjacent odd-numbered and even-numbered
MATRIX channels so that their parameters will have the same
p. 54
settings. This is convenient when you want stereo output.
1.
Access the CHANNEL DISPLAY screen for the MATRIX
channel that you want to stereo-link.
fig.ScrChDispMtx.eps
p. 72
p. 90
2.
Press [F1 (LINK)].
A confirmation message will appear, asking you to confirm the
stereo-link operation.
The function buttons have the following operations.
[F6 (CANCEL)]
[F7 (LINK (L <- R))]
[F8 (LINK (L -> R))]
3.
Press [F7 (LINK (L <- R))] or [F8](LINK (L -> R) ] , the
MATRIX channels will be stereo-linked.
About linked parameters
Stereo-link will link the following parameters.
• Attenuator parameters
• Fader parameters
• The FROM AUX and FROM MAIN L/R send levels and send
switches
• The FROM CH A/B channel selections, send levels, send
switches, and send pans
MATRIX channel operations
Cancels the stereo-link operation
and closes the popup.
The parameters of the odd-num-
bered channel will be set to the val-
ues of the even-numbered channel.
The parameters of the even-num-
bered channel will be set to the val-
ues of the odd-numbered channel.
71