Copying M-48 Settings - RSS M-380 Owner's Manual

Management of the M-48 live personal mixer

Copying M-48 settings

1.
Access the M-48 MANAGER popup (p. 187).
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired copy-source
M-48 unit, and press [F3 (COPY)].
The M-48 COPY popup will appear.
fig.ScrM48Copy_Guide.eps
A B
A.Copy-source unit indication
This indicates the copy-source M-48 unit.
B.Copy-destination list
Specify the copy-destination M-48 unit(s) in this list.
The list shows the following items.
Item Explanation
DEST Press [ENTER] to add or clear the check
mark. A check mark indicates that the
unit is selected as a copy destination.
NO. Indicates the number in the list.
UNIT NAME Indicates the unit name.
C.Copy parameter select buttons
Use these to select the parameters to be copied. Parameters for
which there is a check mark will be copied.
Item Explanation
SOURCE LEV/PAN Source level/pan settings
SOURCE ASSIGN Group assignment settings
PREFERENCES Preference settings
GROUP MIX Group mix
In the M-48 COPY popup, the function buttons perform the
following tasks.
200
3.
4.
C
5.
6.
fig.ScrM48Copy_Conf.eps
7.
Button Operation
[F1 (MARK ALL)] Adds a check mark to all DEST fields
of the copy-destination list.
[F2 (CLEAR Clears the check marks from all
MARKS)] DEST fields of the copy-destination
list. This indication will be on if any
DEST fields have check marks.
[F5 (PASTE)] Executes the copy.
[F8 (CLOSE)] Closes the popup.
Verify that the copy-source unit indication shows the
desired M-48 unit.
If the wrong copy-source unit is selected, press [F8 (CLOSE)] to
close the popup, return to step 2, and select the desired copy
source.
In the copy-destination list, add a check mark to the desired
copy-destination M-48 units.
Press [ENTER] to assign or clear a check mark.
You can use [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] to
assign or clear check marks for all DEST fields in the copy-
destination list.
Use the copy parameter select buttons to select the
parameters that you want to copy.
Press [F5 (PASTE)].
A confirmation message will ask you to confirm the copy
operation.
Press [F8 (PASTE)].
The copy will be executed, and a message indicating the
processing status will appear. This message will close when
copying is completed.
Pressing [F7 (CANCEL)] will cancel the operation.