About The 31-Band Geq - RSS M-380 Owner's Manual

Effects and 31-band GEQ

About the 31-band GEQ

fig.GEQDia.eps
AUX 1 GEQ INSERT OUT
AUX 16 GEQ INSERT OUT
MATRIX 1 GEQ INSERT OUT
MATRIX 8 GEQ INSERT OUT
MAIN L GEQ INSERT OUT
MAIN R GEQ INSERT OUT
The M-380 provides four 31-band GEQ processors, GEQ1–GEQ4. You can insert a 31-band GEQ processor into the MAIN L/R channel, into an
AUX channel or into an MATRIX channel.
GEQ 1–4 tab
fig.ScrGEQRack.eps
fig.ScrGEQRackGuide.eps
1 2 3 4
This shows GEQ1–GEQ4. This area is organized as follows.
1.
GEQ number indication
This indicates the GEQ number.
2.
GEQ INSERT SELECT popup button
This selects the channel into which the GEQ will be inserted.
The selected channel is shown on the button. When you move
the cursor to the button and press [ENTER], the GEQ INSERT
SELECT popup will appear.
3.
IN meter
This indicates the level of the signal being input to the GEQ.
4.
GEQ fader indication
This indicates the state of the GEQ. The GEQ cannot be
operated in this screen.
5.
OUT meter
This indicates the level of the signal being output from the GEQ.
104
GEQ
INPUT
SELECT
IN LEVEL
5 6 7
OUT LEVEL
GEQ 1
31 BAND GEQ
GEQ 2
Same as the above
GEQ 3
Same as the above
GEQ 4
Same as the above
6.
BYPASS button
This bypasses the GEQ. If this is on, the GEQ will be bypassed
and the input signal will be output without modification.
7.
LINK button
This links adjacent odd-numbered and even-numbered GEQ
processors. If they are linked, the GEQ settings will be identical.
When you activate LINK, the odd-numbered unit's settings will
be applied to the even-numbered processor.
The function buttons specific to the GEQ 1–4 tab have the
following operations.
[F5 (EDIT GEQ1)] Accesses the GEQ EDIT popup for GEQ1. p. 106
[F6 (EDIT GEQ2)] Accesses the GEQ EDIT popup for GEQ2. p. 106
[F7 (EDIT GEQ3)] Accesses the GEQ EDIT popup for GEQ3. p. 106
[F8 (EDIT GEQ4)] Accesses the GEQ EDIT popup for GEQ4. p. 106
GEQ
OUTPUT
SELECT
To AUX 1 GEQ INSERT IN
To AUX 16 GEQ INSERT IN
To MATRIX 1 GEQ INSERT IN
To MATRIX 8 GEQ INSERT IN
To MAIN L GEQ INSERT IN
To MAIN R GEQ INSERT IN