Other Settings And Functions; Viewing System Information And Making Basic Mixer Settings - RSS M-380 Owner's Manual

Other settings and functions

This chapter explains other settings and functions.
Accessing the SYSTEM screen
1.
In the SETUP section, press [SYSTEM].
The SYSTEM screen will appear.
fig.ScrSystemGuide.eps
A
In the SYSTEM screen you can view or edit various types of information.
A.MIXER CONFIG field
Here you can view system information and make basic mixer
settings. (p. 170)
B.BRIGHTNESS field
Here you can adjust the brightness of the panel, and display. (p. 171)
C.FADER TOUCH SENSE field
Here you can adjust the touch sensitivity of the faders. (p. 171)
In the SYSTEM screen, the function buttons perform the
following operations.
[F1 (INIT)] Accesses the INITIALIZE pop-
up, where you can initialize the
mixer settings.
[F2 (REAC Accesses the REAC CONFIG
CONFIG)] popup, where you can make
REAC settings.
[F3 (LOAD/ Accesses the LOAD/SAVE
SAVE)] popup, where you can load or
save mixer settings.
[F4 (REMOTE)] Accesses the REMOTE popup,
where you can make remote set-
tings.
[F5 (DATE Accesses the DATE&TIME pop-
TIME)] up, where you can specify the
date and time.
[F6 (USB Accesses the USB MEMORY
MEMORY)] popup, where you can manage
USB memory.
[F7 (SYSTEM Updates the system program.
UPDATE)]
[F8 (LOCK Locks the console to prohibit
CONSOLE)] operation.
SYSTEM UPDATE is for future system program updates. For
details on the system update procedure, refer to the operating
instructions provided with the updater.
170
B C
p. 172
p. 162
p. 173
p. 166
p. 175
p. 176
p. 179
Viewing system information
and making basic mixer
settings
The MIXER CONFIG field of the SYSTEM screen is used to view
system information and make basic mixer settings.
1.
In the SETUP section, press [SYSTEM].
The SYSTEM screen will appear.
fig.ScrSysMixConfGuide.eps
B A C D
A.INFORMATION area
This area shows the firmware version and the state of the
internal lithium battery.
B.INTERNAL SAMPLING FREQ select buttons
These buttons select the sampling frequency at which the M-
380 will operate.
C.LCR SYSTEM button
This button turns the LCR SYSTEM on/off. A check mark is
shown when the setting is on.
D.LCR SETUP popup button
This indicates the AUX that is used by the LCR SYSTEM as
MAIN C. Move the cursor here and press [ENTER] to access
the LCR SETUP popup.
For more information about the LCR SYSTEM button and the
LCR SETUP popup button, refer to .p. 135
2.
View the system information in the INFORMATION area.
The INFORMATION area shows the following items.
System Version System firmware version
Panel Version Panel firmware version
Fader Version Version of the fader firmware
Lithium Battery Status of the internal lithium battery
If the Battery indication shows OK, the internal lithium battery
voltage is satisfactory.
If this shows LOW or NG, the voltage is low. Replace the
internal lithium battery as described in "About the internal
lithium battery" (p. 19).