RSS M-380 Owner's Manual page 148

User settings
4.
When you enter the password and press [F8 (OK)], you will
switch to the user settings you selected in step 2.
If you press [F7 (CANCEL)], the user change will be cancelled.
If the password you entered was incorrect, the following error
message will appear. Press [F8 (OK)] to return to the ENTER
PASSWORD popup.
fig.ScrUserPwdErr.eps
Switching to user settings in USB memory is performed as
follows.
• The user settings in USB memory are copied to internal
memory.
• Operation will switch to the user settings that were copied to
internal memory.
This means that the current user settings will become the user
settings in internal memory.
fig.UserLogin.eps
INTERNAL MEMORY
USER
COPY
USB MEMORY
USER
This allows user settings to be used even after the USB memory
has been exchanged; for example, in order to use the USB
MEMORY recorder. The user settings copied to internal
memory are temporary, and will disappear if you switch to
other user settings.
For this reason, a confirmation message like the following will
appear when you switch to other user settings, suggesting that
you save to USB memory.
fig.ScrUserChgnSave.eps
In this confirmation message, the function buttons perform the
following operations.
[F6 (DON'T SAVE)] Discards the user settings in internal
memory and switches the user set-
tings.
[F7 (CANCEL)] Cancels the change in user settings.
[F8 (SAVE)] Saves the user settings from internal
memory to USB memory, and then
switches the user settings.
148
CHANGE
USER
Creating user settings
You can create user settings if the current user setting has ADMIN
privileges.
User settings are created on USB memory.
1.
Connect USB memory to the USB memory connector.
2.
In the USER section, press [DISP].
fig.ScrUser.eps
The USER screen will appear.
3.
Press [F2 (CREATE USER)].
fig.ScrCreateUser.eps
The CREATE NEW USER popup will appear.
4.
Use the name edit field to edit the user name.
For details on name editing, refer to "Editing a name" (p. 39).
5.
Press [F8 (CREATE)] to create user settings.
The user settings will be created in USB memory.
If you press [F7 (CANCEL)], the operation will be cancelled.
The created user settings will be as follows:
•User level will be all operations permitted, without ADMIN
privileges
•User preferences will be the default condition