Using The Aux/Main Library; Assigning Channels To Dca Groups And Mute Groups - RSS M-380 Owner's Manual

AUX channel and MAIN L/R channel operations
7.
Press [F8 (CLOSE)] to close the popup.
When you execute PASTE, the copy-destination channel select
buttons will be cleared.

Using the AUX/MAIN library

You can recall channel settings from the library, or store the settings
of the current channel in the library.
AUX/MAIN library operations are performed in the AUX/MAIN
LIBRARY popup.
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChAux.eps
2.
Press [F4 (LIBRARY)] to access the AUX/MAIN LIBRARY
popup.
fig.ScrChLibOutGuide.eps
1 2
A.Target channel
This indicates the channel that is the target of the AUX/MAIN
LIBRARY popup.
B.Library data list
This is a list of the library data.
C.Recall parameter select buttons
Use these to select the parameters that will be recalled. You
can select the following parameters.
ATT Attenuator
EQ Four-band EQ
Sends AUX send, MAIN send and MATRIX send
Fader Fader
Balance Balance
Limiter Limiter
64
3
Noise may occur when you preview or recall a library item, but
this is not a malfunction.
AUX sends will not be recalled for AUX channels. The MAIN
send will not be recalled for the MAIN L/R channel.
The function buttons have the following operations.
[F1 (PRESET)] Displays the recall-only PRESET li-
brary.
[F2 (USER)] Displays the USER library, which can
be recalled or stored.
[F3 (PREVIEW)] Previews (auditions) the selected li-
brary data.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)]* Stores the settings of the current
channel into the selected library data.
[F6 (LOCK)]* Locks or unlocks the selected library
data.
[F7 (NAME EDIT)]* Accesses the NAME EDIT popup,
where you can edit the name of the
selected library data.
[F8 (CLOSE)] Closes the popup.
* Available only for the User library.
For details on library operations, refer to "Library operations"
(p. 39).
When you store an AUX channel in the User library, the AUX
sends will be stored with the default values. When you store the
MAIN L/R channel in the User library, the MAIN send will be
stored with the default value.
Assigning channels to DCA
groups and MUTE groups
Output channels can be assigned to DCA groups and MUTE groups.
Assignments to DCA groups and MUTE groups are made in the
GROUP ASSIGN popup.
For details on GROUP ASSIGN popup, refer to "Assigning
channels to DCA groups and MUTE groups" (p. 54).