Editing The Scene List; Scene List Edit Popup - RSS M-400 Owner's Manual

Editing the scene list

The SCENE LIST EDIT popup is used to edit the scene list.

SCENE LIST EDIT popup

fig.ScrSceneListMoveGuide.eps
1
In the SCENE LIST EDIT popup you can edit the scene names, and
copy, cut, paste, insert, or clear scenes in the list.
1.
Scene list
This is a list of the scenes.
The items shown in the scene list are the same as in the scene
list of the SCENE screen (p. 159).
In the SCENE LIST EDIT popup, the function buttons perform the
following operations.
Button Function
[F1 (NAME EDIT)] Accesses the NAME EDIT
popup, where you can edit
the scene name.
[F2 (COPY)] Copies the scene selected in
the scene list.
[F3 (CUT)] Cuts (removes) the scene se-
lected in the scene list.
[F4 (PASTE)] Pastes the copied or cut scene
to the selected number.
[F5 (INSERT)] Inserts the copied or cut
scene to the selected number.
[F6 (CLEAR)] Erases the content of the
scene selected in the scene
list, returning it to a blank
scene.
[F7 (LOCK)] Locks or unlocks the scene
that's selected in the scene
list.
[F8 (CLOSE)] Closes the popup.
When you use [F2 (COPY)] or [F3 (CUT)], the contents of the
selected scene will be temporarily saved in the clipboard. [F4
(PASTE)] or [F5 (INSERT)] paste or insert the contents that were
saved in the clipboard. The contents of the clipboard will
disappear when you close the SCENE LIST EDIT popup.
Accessing the SCENE LIST EDIT popup
1.
Access the SCENE screen.
fig.ScrSceneList.eps
2.
Press [F1 (LIST EDIT)].
fig.ScrSceneListMove.eps
The SCENE LIST EDIT popup will appear.
Editing the name of a scene
You can assign a name of up to sixteen characters to each scene.
1.
Access the SCENE LIST EDIT popup.
fig.ScrSceneListMove.eps
Reference
page
p. 161
p. 162
p. 162
2.
p. 162 From the scene list, select the scene whose name you want
to edit.
p. 162
3.
Press [F1 (NAME EDIT)].
fig.ScrNameEdit.eps
p. 162
The NAME EDIT popup will appear.
4.
Move the cursor to the name edit field, and edit the scene
name.
5.
Press [F8 (CLOSE)] to close the popup.
For details on name editing, refer to "Editing a name" (p. 50).
You can't edit the name of a scene that is locked.
Scene memory
161