Overview Of M7I Router Installation - Juniper M7I Hardware Manual

CHAPTER 5

Overview of M7i Router Installation

Overview of M7i Router Installation
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Overview of M7i Router Installation on page 39
After you have prepared your installation site as described in "M7i Router Site Preparation
Checklist" on page 35, you are ready to unpack and install the router. It is important to
proceed through the installation process in the following order:
Review the safety guidelines explained in "General Safety Guidelines for M Series, MX
1.
Series, and T Series Routers" on page 125 and "General Safety Warnings for M Series,
MX Series, and T Series Routers" on page 126.
Follow the instructions in "Unpacking the M7i Router" on page 41 and "Verifying the
2.
M7i Router Parts Received" on page 42.
Install the cable management system as described in "Installing the M7i Cable
3.
Management System" on page 45.
If you are center-mounting the router, move the mounting brackets as described in
4.
"Moving the Mounting Brackets" on page 46.
Install the router as described in "Installing the M7i Router Into the Rack" on page 47.
5.
Connect the grounding cable as described in "Connecting the Grounding Cable to the
6.
M7i Router" on page 51.
Connect cables to external devices as described in "Connecting the M7i Router to
7.
Management and Alarm Devices" on page 53.
Connect the AC power cords as described in "Connecting Power to an AC-Powered
8.
M7i Router" on page 57 or DC power cables "Connecting Power to a DC-Powered
Router" on page 57.
Power on the router as described in "Powering on the M7i Router" on page 59.
9.
Perform the initial system startup as described in "Initially Configuring the M7i Router"
10.
on page 63.
Connecting the M7i Router to a Management Console or Auxiliary Device on page 54
Connecting the M7i Router to a Network for Out-of-Band Management on page 54
39