Enable; Enable Optic-Info-Update Interval - Dell Force10 Z9000 Reference Manual

enable

Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may need to enter a
password.
C-Series, E-Series, S-Series, Z-Series
Syntax enable [level]
Parameters
level
Defaults 15
Command Modes EXEC
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage Users entering EXEC Privilege mode or any other configured privilege level can access
Information configuration commands. To protect against unauthorized access, use the enable
password command to configure a password for the enable command at a specific
privilege level. If no privilege level is specified, the default is privilege level 15.
Related enable password
Commands
privilege level.

enable optic-info-update interval

Enable polling intervals of optical information updates for simple network management protocol (SNMP).
Z-Series, S4810
Syntax enable optical-info-update interval seconds
To disable optical power information updates, use the no enable optical-info-
update interval command.
Parameters
interval
(OPTIONAL) Enter a number for a privilege level of FTOS. Range: 0 to
15.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
– configures a password for the enable command and to access a
seconds
Enter the keyword interval followed by the polling interval in
seconds. Range: 120 to 6000 seconds. Default: 300 seconds (5
minutes).
107