Verifying Dcb Configuration - Dell Force10 S4810P Configuration Manual

Verifying DCB Configuration

Use the commands in
show
Table 13-2. Displaying DCB Configurations
Command
show dot1p-queue mapping
t unit-number]
show dcb [stack-uni
show qos dcb-input [pfc-profile]
show qos dcb-output [ets-profile]
show qos priority-groups
show interface port-type slot/port pfc
{summary | detail}
show interface port-type slot/port pfc statistics
show interface
port-type slot/port
{summary | detail}
show interface port-type slot/port DCBx detail
{
show stack-unit
0-11 | all
details
{
show stack-unit
0-11 | all
details
Figure 13-5. show dot1p-queue mapping Command Example
FTOS(conf)# show
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue
Figure 13-6. show dcb Command Example
FTOS# show dcb
stack-unit 0 port-set 0
DCB Status :
PFC Port Count :
PFC Queue Count :
Table 13-2 to display DCB configurations.
Output
Displays the current 802.1p priority-queue mapping.
Displays data center bridging status, number of PFC-enabled ports, and
number of PFC-enabled queues. On the master switch in a stack, you can
specify a stack-unit number. Range is : 0 to 5.
Displays the PFC configuration in a DCB input policy.
Displays the ETS configuration in a DCB output policy.
Displays the ETS priority groups configured on the switch, including the
802.1p priority classes and ID of each group.
Displays the PFC configuration applied to ingress traffic on an interface,
including priorities and link delay.
To clear PFC TLV counters, use the
slot/port command.
Displays counters for the PFC frames received and transmitted (by dot1p
priority class) on an interface.
Displays the ETS configuration applied to egress traffic on an interface,
ets
including priority groups with priorities and bandwidth allocation.
To clear ETS TLV counters, enter the
slot/port command.
Displays the DCBx configuration on an interface.
} Displays the PFC configuration applied to ingress traffic on stack-links,
stack ports all pfc
including priorities and link delay.
} Displays the ETS configuration applied to ingress traffic on stack-links,
stack ports all ets
including priorities and link delay.
dot1p-queue-mapping
: 0 0 0 1 2 3 3 3
Enabled
56 (current), 56 (configured)
2 (current), 2 (configured)
clear pfc counters interface
clear ets counters interface
Data Center Bridging (DCB) | 333
port-type
port-type