Dell Force10 S4810P Configuration Manual page 912

To apply a MAC ACL on a VTY line, use the same
Figure 43-18
prompt.
Figure 43-18. Example Access Class Configuration Using TACACS+ Without Prompt
FTOS(conf)#mac access-list standard sourcemac
FTOS(config-std-mac)#permit 00:00:5e:00:01:01
FTOS(config-std-mac)#deny any
FTOS(conf)#
FTOS(conf)#line vty 0 9
FTOS(config-line-vty)#access-class sourcemac
FTOS(config-line-vty)#end
912
| Security
shows how to deny incoming connections from subnet 10.0.0.0 without displaying a login
command as IP ACLs
access-class
(Figure 43-18).