Dell Force10 S4810P Configuration Manual page 956

Table 46-3. MIB Objects for Copying Configuration Files via SNMP
MIB Object
copySrcFileName
copyDestFileType
copyDestFileLocation
copyDestFileName
copyServerAddress
copyUserName
copyUserPassword
To copy a configuration file:
Step Task
1 Create an SNMP community string with read/
write privileges.
2 Copy the f10-copy-config.mib MIB from the Dell Force10 iSupport webpage to the server to which you are
copying the configuration file.
956
| Simple Network Management Protocol (SNMP)
OID
.1.3.6.1.4.1.6027.3.5.1.1.1.1.4
.1.3.6.1.4.1.6027.3.5.1.1.1.1.5
.1.3.6.1.4.1.6027.3.5.1.1.1.1.6
.1.3.6.1.4.1.6027.3.5.1.1.1.1.7
.1.3.6.1.4.1.6027.3.5.1.1.1.1.8
.1.3.6.1.4.1.6027.3.5.1.1.1.1.9
.1.3.6.1.4.1.6027.3.5.1.1.1.1.10
Object Values Description
Path (if file is not in Specifies name of the file.
current directory)
•
and filename.
1 = FTOS file Specifies the type of file to copy to.
2 = running-config
•
3 = startup-config
•
1 = flash Specifies the location of destination
2 = slot0 file.
3 = tftp
•
4 = ftp
5 = scp
Path (if file is not in Specifies the name of destination file.
default directory)
and filename.
IP Address of the The IP address of the server.
server
•
Username for the Username for the FTP, TFTP, or SCP
server. server.
•
Password for the Password for the FTP, TFTP, or SCP
server. server.
Command Syntax
snmp-server community
community-name rw
If copySourceFileType is set to
running-config or startup-config,
copySrcFileName is not required.
If the copySourceFileType is
running-config or startup-config,
the default copyDestFileLocation is
flash.
If the copyDestFileType is a binary
the copyDestFileLocation and
copyDestFileName must be
specified.
If the copyDestFileLocation is FTP
or SCP, copyServerAddress,
copyUserName, and
copyUserPassword must be
specified.
If the copyServerAddress is
specified so must copyUserName,
and copyUserPassword.
If the copyUserName is specified so
must copyUserPassword.
Command Mode
CONFIGURATION