Note: When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode,
but the prompt is hostname#, rather than hostname>.
Configure Logging
FTOS tracks changes in the system using event and error messages. By default, FT OS logs these messages
on:
•
the internal buffer
•
console and terminal lines, and
•
any configured syslog servers
Disable Logging
To disable logging:
Task
Disable all logging except on the console.
Disable logging to the logging buffer.
Disable logging to terminal lines.
Disable console logging.
Log Messages in the Internal Buffer
All error messages, except those beginning with %BOOTUP (Message), are log in the internal buffer.
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Configuration Task List for System Log Management
The following list includes the configuration tasks for system log management:
•
Disable System Logging
•
Send System Messages to a Syslog Server
Command Syntax
Command Mode
CONFIGURATION
no logging on
CONFIGURATION
no logging buffer
CONFIGURATION
no logging monitor
CONFIGURATION
no logging console
Management | 57