Multicast Features; Implementation Information; Enable Ip Multicast - Dell Force10 S4810P Configuration Manual

Multicast Features

Multicast Features
This chapter contains the following sections:
• Enable IP Multicast on page 709
• Multicast with ECMP on page 710
• First Packet Forwarding for Lossless Multicast on page 711
• Multicast Policies on page 712
• Multicast Traceroute on page 719
FTOS supports the following multicast protocols:
• PIM Sparse-Mode (PIM-SM) on page 777
• Internet Group Management Protocol (IGMP) on page 459
• Multicast Source Discovery Protocol (MSDP) on page 665

Implementation Information

• Multicast is supported on secondary IP addresses on the

Enable IP Multicast

Enable IP Multicast
Prior to enabling any multicast protocols, you must enable multicast routing.
Task
Enable multicast routing.
are supported on platforms:
is supported on platforms
e c s
platform.
c e s
Command Syntax
ip multicast-routing
33
Command Mode
CONFIGURATION
Multicast Features | 709