Icmpv6 - Dell Force10 S4810P Configuration Manual

Table 25-2. FTOS and IPv6 Feature Support (continued)
IPv6 Access Control
Lists
IPv6 Multicast
PIM-SM for IPv6
PIM-SSM for IPv6
MLDv1/v2
MLDv1 Snooping
MLDv2 Snooping
IPv6 QoS
trust DSCP values

ICMPv6

ICMPv6
ICMP for IPv6 combines the roles of ICMP, IGMP and ARP in IPv4. Like IPv4, it provides functions for
reporting delivery and forwarding errors, and provides a simple echo service for troubleshooting. The
FTOS implementation of ICMPv6 is based on RFC 2463.
Generally, ICMPv6 uses two message types:
• Error reporting messages indicate when the forwarding or delivery of the packet failed at the
destination or intermediate node. These messages include Destination Unreachable, Packet Too Big,
Time Exceeded and Parameter Problem messages.
• Informational messages provide diagnostic functions and additional host functions, such as Neighbor
Discovery and Multicast Listener Discovery. These messages also include Echo Request and Echo
Reply messages.
The FTOS
Type-2 messages.
546
| IPv6 Routing
7.4.1 8.2.1
7.4.1 8.2.1
7.5.1 8.2.1
7.4.1 8.2.1
7.4.1 8.2.1
8.3.1.0 8.3.1.0
7.4.1 8.2.1
is supported on platforms
and commands extend to support IPv6 addresses. These commands use ICMPv6
ping traceroute
7.8.1 8.2.1.0 8.3.10.0
8.4.2 8.4.2 N/A
8.4.2 8.4.2 N/A
8.4.2 8.4.2 N/A
8.4.2 8.4.2 N/A
8.4.2 8.4.2 N/A
8.4.2 8.4.2 N/A
c e s
IPv6 Access Control Lists in the
Command Line Reference Guide
IPv6 Multicast in this chapter;
IPv6 PIM in the
FTOS Command Line
Reference Guide
IPv6 Multicast in this chapter
IPv6 PIM in the
FTOS Command Line
Reference Guide
IPv6 Multicast in this chapter
Multicast IPv6 in the
FTOS Command
Line Reference Guide
IPv6 Multicast in this chapter
Multicast IPv6 in the
FTOS Command
Line Reference Guide
IPv6 Multicast in this chapter
Multicast IPv6 in the
FTOS Command
Line Reference Guide
QoS for IPv6 in this chapter
FTOS