Dell Force10 S4810P Configuration Manual page 134

Command Syntax
match interface
match ip address
match ipv6 address
match ip next-hop
{
access-list-name
}
prefix-list-name
match ipv6 next-hop
{
access-list-name
}
prefix-list-name
match ip route-source
{
access-list-name
}
prefix-list-name
match ipv6 route-source
{
access-list-name
}
prefix-list-name
match metric
metric-value
match origin { egp | igp |
incomplete }
match route-type { external
[ type-1 | type-2 ] | internal | level-1
| level-2 | local }
134
| Access Control Lists (ACLs)
Command Mode
CONFIG-ROUTE-MAP
interface
CONFIG-ROUTE-MAP
prefix-list-name
CONFIG-ROUTE-MAP
prefix-list-name
CONFIG-ROUTE-MAP
| prefix-list
CONFIG-ROUTE-MAP
| prefix-list
CONFIG-ROUTE-MAP
| prefix-list
CONFIG-ROUTE-MAP
| prefix-list
CONFIG-ROUTE-MAP
CONFIG-ROUTE-MAP
CONFIG-ROUTE-MAP
Purpose
Match routes whose next hop is a specific
interface. The parameters are:
• For a Fast Ethernet interface, enter the
keyword FastEthernet followed by the slot/
port information.
• For a 1-Gigabit Ethernet interface, enter the
keyword gigabitEthernet followed by the
slot/port information.
• For a loopback interface, enter the keyword
loopback followed by a number between
zero (0) and 16383.
• For a port channel interface, enter the keyword
port-channel followed by a number from 1
to 255 for TeraScale and ExaScale, 1 to 32 for
EtherScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the
keyword tengigabitEthernet followed by
the slot/port information.
• For a VLAN, enter the keyword vlan followed
by a number from 1 to 4094.
•
For a 40-Gigabit Ethernet interface, enter the
fortyGigE
keyword followed by the slot/port
information.
Match destination routes specified in a prefix list
(IPv4).
Match destination routes specified in a prefix list
(IPv6).
Match next-hop routes specified in a prefix list
(IPv4).
Match next-hop routes specified in a prefix list
(IPv6).
Match source routes specified in a prefix list
(IPv4).
Match source routes specified in a prefix list
(IPv6).
Match routes with a specific value.
Match BGP routes based on the ORIGIN attribute.
Match routes specified as internal or external to
OSPF, ISIS level-1, ISIS level-2, or locally
generated.