Dell Force10 S4810P Configuration Manual page 456

linecard 4
linecard 5 is not present.
Note: [b] : booted
Upgrade cache boot image(4.7.5.427) for all cards [yes/no]: yes
cache boot image downloading in progress...
!!!!!!!!!!!!!!!!!!!!!
cache boot upgrade in progress. Please do NOT power off the card.
Note: Updating Flash Table of Contents...
Erasing TOC area...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Upgrade result :
================
All cache boot image upgraded to 4.7.5.427
FTOS#
View your cache boot configuration using the command
below.
FTOS#show boot system all
Current system image information in the system:
=============================================
Type
----------------------------------------------------------------
CP
RP1
RP2
linecard 0
linecard 1 is not present.
linecard 2 is not present.
linecard 3 is not present.
linecard 4
linecard 5 is not present.
FTOS#
If you attempt to cache a system image that does not support the cache boot feature,
Message 8 System Image does not Support Cache Boot Error
%% Error: Given image is not cache boot aware image.
Verify that the system is configured to boot with the selected cache boot image using the command
as shown in the example below.
bootvar
FTOS#copy running-config startup-config
File with same name already exist.
Proceed to copy the file [confirm yes/no]: yes
!
10496 bytes successfully copied
1d6h32m: %RPM0-P:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by
default
R4_E300#show bootvar
PRIMARY IMAGE FILE =
456
| High Availability
invalid 6.5.1.8
[n] : next boot
Boot Type A
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
system://4.7.5.427
, as shown in the example
show boot system all
B
invalid
invalid
invalid
invalid
6.5.1.8
Message 8 appears.
show