Viewing Information Advertised By Adjacent Lldp Agents - Dell Force10 S4810P Configuration Manual

Figure 30-10. Viewing LLDP Interface Configurations
R1(conf-lldp)#exit
R1(conf)#interface gigabitethernet 1/31
R1(conf-if-gi-1/31)#show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
R1(conf-if-gi-1/31)#protocol lldp
R1(conf-if-gi-1/31-lldp)#show config
!
protocol lldp
R1(conf-if-gi-1/31-lldp)#

Viewing Information Advertised by Adjacent LLDP Agents

Display brief information about adjacent devices using the command
Figure 30-11. Display all of the information that neighbors are advertising using the command
neighbors detail
Figure 30-11. Viewing Brief Information Advertised by Adjacent LLDP Agents
R1(conf-if-gi-1/31-lldp)#end
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID
-------------------------------------------------------------------------
Gi 1/21
Gi 1/31
654
| Link Layer Discovery Protocol (LLDP)
, as shown in Figure 30-12.
Rem Host Name
-
-
Rem Port Id
GigabitEthernet 2/11
GigabitEthernet 3/11
, as shown in
show lldp neighbors
Rem Chassis Id
00:01:e8:06:95:3e
00:01:e8:09:c2:4a
show lldp