Applying Dcb Policies In A Switch Stack - Dell Force10 S4810P Configuration Manual

Applying DCB Policies in a Switch Stack

Note: The S4820T does not support DCB on any of the 48 RJ-45 10 Gigabit stacking links.
You can apply a DCB input policy with PFC configuration to all stacked ports in a switch stack or on a
stacked switch. You can apply different DCB input policies to different stacked switches.
Task
Apply the specified DCB input policy on
all ports of the switch stack or a single
stacked switch.
FTOS Behavior:
Entering the command removes all DCB input policies applied to stacked ports.
A
dcb-policy input stack-unit all
stack-unit-id
previous
dcb-policy input stack-unit all
Entering the
stacked ports and resets PFC to its default settings. The
command removes only the DCB input policy applied to the specified switch.
You can apply a DCB output policy with ETS configuration to all stacked ports in a switch stack or an
individual stacked switch. In addition, you can apply dif f erent DCB output policies to different stack units.
Task
Apply the specified DCB output policy on
all ports of the switch stack or a stacked
switch.
FTOS Behavior:
Entering the command removes all DCB input policies applied to stacked ports.
A
dcb-policy output stack-unit all
stack-unit-id
any previous
Entering the
stacked ports. The no
policy applied to the specified switch.
Command
dcb-policy input stack-unit {all |
stack-unit-id} stack-ports all
dcb-input-policy-name
command overwrites any previous
configurations. Similarly, a
no dcb-policy input stack-unit al
Command
dcb-policy output stack-unit {all |
stack-unit-id} stack-ports all
dcb-output-policy-name
command overwrites any previous
configurations. Similarly, a
dcb-policy output stack-unit all
no dcb-policy output stack-unit all
dcb-policy output stack-unit stack-unit-id
dcb-policy input stack-unit stack-unit-id
configuration.
l command removes all DCB input policies applied to
no dcb-policy input stack-unit stack-unit-id
dcb-policy output stack-unit stack-unit-id
configuration.
command removes all DCB output policies applied to
command removes only the DCB output
Command Mode
CONFIGURATION
dcb-policy input stack-unit
command overwrites any
Command Mode
CONFIGURATION
dcb-policy output stack-unit
command overwrites
Data Center Bridging (DCB) | 321