Dell Force10 S4810P Configuration Manual page 265

High-density, 1ru 48-port 10gbe switch
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

2. The system receives a DHCP offer from a DHCP server with the following parameters:
13:23:47: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP acquired IP 10.16.134.167 mask 255.255.0.0 server
IP 10.16.134.207.
13:23:48: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP tftp IP NIL sname NIL dns IP NIL router IP NIL.
13:23:48: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP image file tftp://10.16.127.53/mxl.bin.
13:23:48: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: DHCP config file NIL.
13:23:49: %STKUNIT0-M:CP %JUMPSTART-5-BOOT_OFFER: stacking info NIL.
3. The system downloads the build image from the file server.
4. The system compares the current local build image to the downloaded build image as follows:
a
If the build image versions match, the system does not try to load any image and comes up with the
FTOS prompt.
00:03:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
: 1
00:03:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
0
00:03:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
0
00:03:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
0
00:03:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
00:03:07: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
00:03:07: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
00:03:07: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE_HEADER_INFO:
Downloaded Image Major Version
Downloaded Image Minor Version
Downloaded Image Main Version
Downloaded Image Patch Version
Flash A Image Major Version
Flash A Image Minor Version
Flash A Image Main Version
Flash A Image Patch Version
Bare Metal Provisioning 3.0 (BMP 3.0) |
:
:
:
: 1
: 0
: 0
: 0
265

Advertisement

Table of Contents
loading

Table of Contents