Dell Force10 S4810P Configuration Manual page 427

Step Command Syntax
2 tagged interface slot/
port {range}
3 interface primary int
slot/port secondary int
slot/port control-vlan
vlan id
4
mode master
5 member-vlan vlan-id
{range}
6 no disable
Configure and add the Member VLANs
Control and Member VLANS are configured normally for Layer 2. Their status as Control or Member is
determined at the FRRP group commands. For complete information about configuring VLANS in Layer 2
mode, refer to Layer
Command Mode
CONFIG-INT-VLAN
CONFIG-FRRP
CONFIG-FRRP
CONFIG-FRRP
CONFIG-FRRP
2.
Purpose
Tag the specified interface or range of interfaces
to this VLAN.
Interface:
• For a 10/100/1000 Ethernet interface, enter
the keyword keyword
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the
keyword
GigabitEthernet
slot/port information
• For a 10 Gigabit Ethernet interface, enter the
keyword
TenGigabitEthernet
slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the
fortyGigE
keyword followed by the slot/port
information.
Slot/Port, Range: Slot and Port ID for the
interface. Range is entered Slot/Port-Port.
Assign the Primary and Secondary ports, and the
Control VLAN for the ports on the ring.
Interface:
• For a 10/100/1000 Ethernet interface, enter
the keyword keyword
followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the
keyword
GigabitEthernet
slot/port information
• For a SONET interface, enter the keyword
followed by slot/port information.
sonet
• For a 10 Gigabit Ethernet interface, enter the
keyword
TenGigabitEthernet
slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the
fortyGigE
keyword followed by the slot/port
information.
Slot/Port: Slot and Port ID for the interface.
VLAN ID: The VLAN identification of the
Control VLAN.
Configure the Master node
Identify the Member VLANs for this FRRP
group
VLAN-ID, Range: VLAN IDs for the ring's
Member VLANS.
Enable FRRP
Force10 Resilient Ring Protocol (FRRP) | 427
GigabitEthernet
followed by the
followed by the
GigabitEthernet
followed by the
followed by the