Lock Configuration Mode - Dell Force10 S4810P Configuration Manual

Login:
Login: admin
Password:
FTOS>exit
FTOS#telnet 2200:2200:2200:2200:2200::2201
Trying 2200:2200:2200:2200:2200::2201...
Connected to 2200:2200:2200:2200:2200::2201.
Exit character is '^]'.
FreeBSD/i386 (freebsd2.force10networks.com) (ttyp1)
login: admin
FTOS#

Lock CONFIGURATION mode

FTOS allows multiple users to make configurations at the same time. You can lock CONFIGURATION
mode so that only one user can be in CONFIGURATION mode at any time
A two types of locks can be set: auto and manual.
• Set an auto-lock using the command
When you set an auto-lock, every time a user is in CONFIGURA TION mode all other users are denied
access. This means that you can exit to EXEC Privilege mode, and re-enter CONFIGURA TION mode
without having to set the lock again.
• Set a manual lock using the command
you configure a manual lock, which is the default, you must enter this command time you want to enter
CONFIGURATION mode and deny access to others.
FTOS(conf)#configuration mode exclusive auto
BATMAN(conf)#exit
3d23h35m: %RPM0-P:CP %SYS-5-CONFIG_I: Configured from console by
FTOS#config
! Locks configuration mode exclusively.
FTOS(conf)#
If another user attempts to enter CONFIGURATION mode while a lock is in place,
their terminal.
Message 1 CONFIGURATION mode Locked Error
% Error: User "" on line console0 is in exclusive configuration mode
If any user is already in CONFIGURATION mode when while a lock is in place,
their terminal.
Message 2 Cannot Lock CONFIGURATION mode Error
% Error: Can't lock configuration mode exclusively since the following users are
currently configuring the system:
User "admin" on line vty1 ( 10.1.1.1 )
68
| Management
configuration mode exclusive auto
from CONFIGURATION mode. When
configure terminal lock
(Message 2).
from CONFIGURATION mode.
console
Message 1 appears on
Message 2 appears on