Show Hardware Commands - Dell Force10 S4810P Configuration Manual

show hardware commands

Note: The
show hardware
The
show hardware
These commands display information from a hardware sub-component and from hardware-based feature
tables.
Table 14-3 lists the
Note: The
show hardware
Assistance Center.
Table 14-3. show hardware Commands
Command
show hardware stack-unit {0-11} cpu
management statistics
show hardware stack-unit {0-11} cpu data-plane
statistics
show hardware stack-unit {0-11} buffer
total-buffer
show hardware stack-unit {0-11} buffer unit {0-1}
total-buffer
show hardware stack-unit {0-11} buffer unit {0-1}
port {1-64 | all} buffer-info
show hardware stack-unit {0-11} buffer unit {0-1}
port {1-64} queue {0-14 | all} buffer-info
show hardware stack-unit {0-11} cpu party-bus
statistics
show hardware stack-unit {0-11} drops unit {0-1}
port {1-64}
show hardware stack-unit {0-11} stack-port
{0-64}
show hardware stack-unit {0-11} unit {0-1}
counters
show hardware stack-unit {0-11} unit {0-1} details
show hardware stack-unit {0-11} unit {0-1}
execute-shell-cmd {command}
command tree is supported on the S4810 and Z9000.
command tree consists of EXEC Privilege commands used with the S4810 system.
commands available as of the latest FTOS version on the S4810.
show hardware
commands should only be used under the guidance of Dell Force10 Technical
Description
View internal interface status of the stack-unit CPU port which connects to
the external management interface.
View driver-level statistics for the data-plane port on the CPU for the
specified stack-unit. It provides insight into the packet types entering the
CPU to see whether CPU-bound traffic is internal (IPC traffic) or network
control traffic, which the CPU must process.
View the modular packet buffers details per stack unit and the mode of
allocation.
View the modular packet buffers details per unit and the mode of
allocation.
View the forwarding plane statistics containing the packet buf f er usage per
port per stack unit.
View the forwarding plane statistics containing the packet buffer statistics
per COS per port.
View input and output statistics on the party bus, which carries
inter-process communication traffic between CPUs.
View the ingress and egress internal packet-drop counters, MAC counters
drop, and FP packet drops for the stack unit on per port basis. It assists in
identifying the stack unit/port pipe/port that may experience internal drops.
View the input and output statistics for a stack-port interface.
View the counters in the field processors of the stack unit.
View the details of the FP Devices, and Hi gig ports on the stack-unit.
Execute a specified bShell commands from the CLI without going into the
bShell.
S-Series Debugging and Diagnostics | 359