Configure Slb Gogo-Mode Health-Check - Extreme Networks ExtremeWare Command Reference Manual

configure slb gogo-mode health-check

configure slb gogo-mode <port number> health-check <ip address>
Description
Configures the health checker with the common IP addresses of the GoGo mode servers in this group.
Syntax Description
port number
ip address
Default
N/A
Usage Guidelines
Use this command to configure the IP address before configuring individual health checks.
Example
The following command configures the GoGo mode health check for the group with port 29 as the
master port and an IP address of 192.168.200.2:
configure slb gogo-mode 29 health-check 192.168.200.2
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies the GoGo mode master port.
Specifies an IP address.
configure slb gogo-mode health-check
533