Commands for Configuring Slots and Ports on a Switch
show ports info
show ports {mgmt | <portlist>| vlan <vlan name>} info {detail}
Description
Displays detailed system-related information.
For PoS modules. Displays port information that includes new DiffServ and RED configuration
parameters.
For
"3"
series module. If you specify the
and the ingress QoS profile, ingress IPTOS replacement, and egress rate limiting configurations.
Syntax Description
mgmt
Specifies the management port. Supported only for switches that provide a management port, such
as the Summit 400.
portlist
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*,
2:5, 2:6-2:8.
vlan name
Specifies a VLAN name.
detail
Specifies detailed port information. (6.0 and later)
Default
N/A
Usage Guidelines
This command displays the following:
• Port number
• Diagnostics
• Port configuration
— RED state (on "i" series only)
— Admin state
— Link state
— Link counter
— VLAN configuration
— STP configuration
— Aggregate bandwidth control percentage
— Trunking
— EDP
— DLCS (on "i" series only)
— Load balancing
— Learning
338
keyword, the output displays the flow control state
detail
ExtremeWare 7.7 Command Reference Guide