Programming - Avaya PARTNER Advanced Communications System Installation And Use Manual

Programming

For Call Coverage Rings (#116)—Release 2.0 only
To change the number of times a call rings at an extension before it is sent to the covering
extension:
f00ss#116
1. Press
2. Enter the number of the extension to be programmed.
3. Enter a different setting (1–9; 2 is the factory setting).
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.
For Call Coverage Rings (#320)—Release 3.0 or Later
f00ss#320
1. Press
The current ring setting displays.
2. Enter the number of the extension to be programmed.
D
3. Press
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.
n
until the appropriate value appears (1–9; 2 is the factory setting).
n
Programming System Options
4
4
at extension 10 or 11.
p
or until the extension number appears
4
at extension 10 or 11.
p
or until the extension number appears
Call Coverage Rings (#116 or #320)
4-9