Features Available With Release 4.0 Or Later; Features Available With Release 5.0 Or Later; Features Available With Release 6.0 Or Later - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Features Available with Release 4.0 or Later

Support of the 1600 DSL module, a module that contains up to 16 lines on one line jack.
Caller ID name and number appear on display telephones while a call is ringing.
Newly designed carrier, requiring no cover.

Features Available with Release 5.0 or Later

Support of the 012E module, a module that increases the maximum extension capacity to 48.
Support of the Endeavor 362EC module, enabling PARTNER
function with PARTNER ACS.
Remote administration of the 1600 DSL module is available through the PARTNER ACS R6.0
PC Administration software. For more information, see the PARTNER
Administration Getting Started.
With the PARTNER ACS R6.0 PC Administration software, the content of the PC Cards that
are installed in the PARTNER ACS processor module as well as the modules installed in the
carrier are displayed in an inventory screen. For more information, see the PARTNER
R6.0 PC Administration Getting Started.
Firmware upgrade capability of the 1600 DSL and 012E modules is available by using a
Remote Access PC Card or a Backup/Restore PC Card that is configured for the firmware
upgrade.

Features Available with Release 6.0 or Later

Support of the T1 module, a module that contains up to 16 lines on one line jack.
You must use the PARTNER ACS R6.0 PC Administration software to administer the
T1 lines on a PARTNER system.
Support for Direct Inward Dialing (DID) service for PARTNER systems that have a T1 module.
You must use the PARTNER ACS R6.0 PC Administration software to administer the DID
service.
Remote Call Forwarding to allow users to forward all intercom, transferred, and outside calls
from their extensions to an outside telephone number they specify.
Cell Phone Connect to allow users to forward all intercom, transferred, and outside calls from
their extensions to an outside telephone number they specify and simultaneously have the
PARTNER system also ring their extensions. Depending on how the user's coverage is
administered (for example, they have a PARTNER Messaging system), the call can go to
coverage. Cell Phone Connect is available only on PARTNER systems that have a T1
module.
Administrable Hold Reminder Tone to allow you to set the length of time calls must be on
hold before the Hold Reminder Tone alerts the users.
Features
1-4
1
1
®
Endeavor telephones to
®
ACS R6.0 PC
1
®
ACS