Considerations
On system display telephones, Automated Attendant appears when a call is being
transferred from an auto attendant. In Release 6.0 and later, the Caller ID information (if
available) will be displayed automatically after the transfer is completed. Transfer from AA
or Transfer from Auto Att appears when a call transferred by an auto attendant was not
answered and is being returned to your extension.
For each auto attendant extension, use Transfer Return Extension (#306) to identify the
extension to which a call should be routed if the destination extension does not answer.
Set Automatic Extension Privacy (#304) to Not Assigned for the auto attendant extension if
you want to be able to intercept calls routed to the device.
Programming
To identify an extension where an auto attendant is installed:
f00ss#607
1. Press
2. Enter the extension number to which the auto attendant is connected.
3. To assign or unassign the extension, press
1 = Assigned
2 = Not Assigned (the factory setting)
4. To assign or unassign a second auto attendant extension, press
extension number appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
9
9
at extension 10 or 11.
D
until the appropriate value appears:
n
Using Auxiliary Equipment
p
or
until the
Auto Attendant
9-9